Passenger and material hoist rack and pinion SC320(BZ) KP-B17 SC320/320(BZ) KP-B18
Configuration
There is a small crane for conenient assembly of the construction lift.
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency Drive (VFD), with low starting current and much less wear and tear, very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
Lighting inside construction elevator car is LED ceiling lamp
The construction material hoist cage roof doors are equipped with Interlock.
Equipped with hoist drop test facility with remote control.
Features and Advantages
* The modular and standardizing system makes the Kangbo construction elevators be flexible, efficient, safe, productive, low energy consumptive and ownership cost, making them the best choice for both construction and rental companies.
* The material hoist runs without vibration or trembling. The man and material lift starts and stops without surging or jerking.
* The passenger and elevator is reliable with very little breakdown and is durable with very long work-life.
* Adopt energy-saving helical reducers made specially for rack and pinion elevators, extremely strong, reliable and durable.
* Racks centering at mast reduce partial load torque of builders hoists, makes the construction hoists run more stably and smoothly.
* Applying non-eccentric rollers, make the installation of construction site elevators be faster and easier, with much less error.
* The integrated elevator car roof, which made by a steel plate with edges fully welded one time to complete, enhance hoist cage strength and ensure no water leakage.
* The elevators are equipped with full set of safety facilities, including centrifugal brake, limit switches, Electromechanical interlocks.
Technical Data
| Item & Article No. |
SC320(BZ) KP-B17, SC320/320(BZ) KP-B18 |
| Payload capacity |
3,200 kg per cage |
| Lifting speed |
0–46 m/min. |
| Max. lifting height |
450 m |
| Cage width (internal) |
1.5 m |
| Cage length (internal) |
3.2 m |
| Cage height (internal) |
2.35 m |
| Motor control |
FC control |
| Engine power |
3x15 kw per cage |
| Gearbox |
Helical reducer |
| Safety device type |
centrifugal brake |
| Power supply range |
380–500 V, 50 or 60 Hz, 3 phase |
| Type of mast |
square column 650*650 mm with bolted rack |
| Length mast section |
1.508 m |
| Rack module |
8 |
Product Tags:
|
|
FC Motor Control Personnel And Materials Hoist With Energy Saving Helical Reducers Images
|
